Pass Exam With Full Sureness - D-NWG-DS-00 Dumps with 123 Questions
Verified D-NWG-DS-00 dumps Q&As - 100% Pass from Actual4Labs
NEW QUESTION # 17
Which tool is most commonly used for Layer 2 (L2) network planning?
Response:
- A. OS10 Licensing
- B. FastList
- C. Unisphere
- D. EPS Tool
Answer: A
NEW QUESTION # 18
FastScript can be used to automatically generate and apply __________ across multiple devices in a network, ensuring consistency and accuracy.
Response:
- A. Configuration scripts
- B. Security protocols
- C. Routing policies
- D. IP addresses
Answer: A
NEW QUESTION # 19
Which lab environment is most commonly used for verifying the correctness of scripts generated by FastScript?
Response:
- A. CloudIQ
- B. Real-time Network Lab
- C. EPS Tool
- D. Simulation Lab
Answer: B
NEW QUESTION # 20
What routing protocol is recommended when designing the leaf-spine network of a customer?
Response:
- A. PTP
- B. IS-IS
- C. Static
- D. BGP
Answer: D
NEW QUESTION # 21
Which of the following is an essential part of deployment support to prevent downtime during the go-live phase?
Response:
- A. Enabling traffic monitoring tools
- B. Conducting a final network assessment
- C. Scheduling system backups
- D. Implementing IP address restrictions
Answer: B
NEW QUESTION # 22
A customer PowerSwitch deployment requires additional TOR switches as part of the architecture. Which switch OS supports MLAG instead of VLT?
Response:
- A. OS10
- B. OS9
- C. NX-OS 7.3
- D. OS6
Answer: D
NEW QUESTION # 23
A delivery engineer is deploying a pair of Dell PowerSwitch S5232F-ON switches for a VxRail deployment. What is the correct order of steps for configuring the switches?
Response:
- A. Connect to OS10 Web UI.
- B. Connect to OS10 Web UI.
- C. Connect to OS10 Web UI.
- D. Connect to OS10 Web UI.
Answer: D
NEW QUESTION # 24
The optical cables in a local area network are providing insufficient power. An engineer observes that the color of the cables is aqua. What cable did the engineer identify?
Response:
- A. Single mode (OS1/OS2)
- B. Multimode 50 μm, laser optimized (OM4+)
- C. Multimode 50 μm, laser optimized (OM3, OM4)
- D. Multimode 50 μm and 62.5 μm (OM1, OM2)
Answer: C
NEW QUESTION # 25
A customer is planning for a Cyber Recovery vault. They want the vault to have the strongest level of protection from external connections. The vault must be able to send out SMTP data out. What device should be connected on the edge of the vault?
Response:
- A. Firewall
- B. Air gap
- C. Data Diode
- D. Router
Answer: C
NEW QUESTION # 26
What troubleshooting type is the show ip route command used for?
Response:
- A. Layer 2
- B. Layer 1
- C. Layer 3
Answer: C
NEW QUESTION # 27
Which of the following steps should be taken when modifying a network design template for a specific project?
Response:
- A. Add all devices to a single VLAN
- B. Customize the template to reflect the unique requirements of the current project
- C. Use a generic template without customization
- D. Reuse the template from a previous project without changes
Answer: B
NEW QUESTION # 28
What is the correct order of steps involved in OSPF troubleshooting?
Response:
- A. 1. Check if the devices are in the same area and area type.
- B. 1. Check if the devices are in the same area and area type.
- C. 1. Check if the devices are in the same area and area type.
- D. 1. Check if the devices are in the same area and area type.
Answer: A
NEW QUESTION # 29
What is the primary purpose of the FastScript tool in network design?
Response:
- A. To generate configuration scripts for network devices
- B. To create VLAN assignment tables
- C. To monitor network performance in real-time
- D. To automate the deployment of network devices
Answer: A
NEW QUESTION # 30
Which document is essential for verifying that all network components meet design specifications after installation?
Response:
- A. Pre-Deployment Checklist
- B. VLAN Assignment Sheet
- C. Post-Deployment Verification Template
- D. Security Policy Document
Answer: C
NEW QUESTION # 31
A Delivery Engineer experiences hardware issues that they cannot resolve during a network deployment. Which resource should they contact first for support?
Response:
- A. Dell ProSupport
- B. Design Architect
- C. Project Manager
Answer: A
NEW QUESTION # 32
A __________ template is used to capture the VLAN IDs, associated devices, and IP addressing for each VLAN in the network.
Response:
- A. VLAN Assignment
- B. Troubleshooting
- C. Security Policy
- D. Pre-Deployment Configuration
Answer: A
NEW QUESTION # 33
......
D-NWG-DS-00 Dumps Full Questions - Exam Study Guide: https://gocertify.actual4labs.com/EMC/D-NWG-DS-00-actual-exam-dumps.html