Get New 2022 Valid Practice To your HPE0-S22 Exam (Updated 98 Questions)
HPE Master ASE Advanced Server Solutions Architect V3 HPE0-S22 Exam Practice Test Questions Dumps Bundle!
To get more details visit:
HPE Master ASE - Server Solutions Architect (HPE0-S22) Exam Reference
Foundational server architectures and technologies 15%
- Determine optimal processors for specific use cases and operational workloads.
- Determine interconnect (networking, storage) technologies based on customer/solution requirements.
- Explain the benefits of APIs.
NEW QUESTION 21
Which discussion point describes a Tier I approach to datacenter redundancy levels?
- A. using a single path for power and cooling distribution without redundant components
- B. composing the solution of basic hypervisor clustering technology
- C. optimizing DIMM memory and RAID protected storage
- D. implementing primarily a storage redundancy technique
Answer: B
NEW QUESTION 22
An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE Moonshot 45XGc Switch, and an HPE 4-QSFP+ Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link.
How should the architect change the proposal?
- A. Add another HPE Moonshot 45XGc Switch and 4-QSFP+ Uplink Module.
- B. Change the 4-QSFP+ Uplink Module to a 16-SFP+ Uplink Module.
- C. Add another FlexibleLOM adapter for each cartridge.
- D. Change the HPE Moonshot 45XGc Switch to an HPE Moonshot 180G switch.
Answer: A
NEW QUESTION 23
What defines lease rate factor (LRF)?
- A. the expected time to recover the initial investment
- B. the periodic rental payment, expressed as a percentage of equipment cost
- C. the sum of all costs incurred
- D. the cost of the direct capital expenditure, divided by the expected lifespan of the equipment
Answer: B
NEW QUESTION 24
HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink ModulesA customer is planning to replace its DAS-based third-party server solution with an HPE BladeSystem solution using FlexFabric connected to an iSCSI based HPE StoreVirtual 3200.
Which method should the architect recommend for migrating data from the old system to the new system?
- A. Use a LAN-based file transfer method
- B. Use Peer Motion with a temporary 180-day license
- C. Use Virtual Copy software
- D. Use Business Copy software licensed to the current total size of all DAS storage
Answer: A
NEW QUESTION 25
An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows:
- one chassis with 30 m710 cartridges
- two chassis with 30 m800 cartridges each
The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows:
- one chassis with 30 m710 cartridges and 15 m800 cartridges
- one chassis with 45 m800 cartridges
What should the architect explain to the customer?
- A. Mixing different models of cartridges requires the customer to use an HPE Moonshot Provisioning Manager (MPM)
- B. Mixing different models of cartridges in the same chassis is not supported
- C. A chassis can support both m710 and m800 cartridges, but the m710 cartridges will not be able to use their accelerators
- D. A chassis can support both m710 and m800 cartridges, but the m710 cartridge adapters will operate at
1Gbps rather than 10Gbps
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 26
An architect is discussing advantages of the Software Defined Datacenter concept used by HPE OneView with a customer. The customer is focused on improving the data center agility and manageability.
Which key benefit of the SDDC should the architect discuss with customer?
- A. results in significant power and cooling expense reduction
- B. various elements of the infrastructure are virtualized and delivered as a service
- C. offers a virtual machine self-service solution
- D. improved IRR and NPV results for the customer
Answer: B
NEW QUESTION 27 
An architect proposes an HPE Moonshot solution to a customer. The customer informs the architect that the data center switches can only provide four 40GbE ports per rack.
How should the architect modify the proposed solution so that each rack meets the requirement?
- A. Create two Intelligent Resilient Framework (IRF) fabrics, each with four switch modules, and let the switches in each fabric share uplinks
- B. Use the iLO Chassis Management (CM) module port to daisy chain the chassis together and let the chassis in the daisy chain share uplinks
- C. Replace the 45XGc modules with the 180G module to aggregate uplink ports on multiple chassis into a single port
- D. Use the iLO Chassis Management (CM) module port to support both iLO and production traffic on four of the HPE Moonshot chassis
Answer: B
NEW QUESTION 28
An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows:
- one chassis with 30 m710 cartridges
- two chassis with 30 m800 cartridges each
The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows:
- one chassis with 30 m710 cartridges and 15 m800 cartridges
- one chassis with 45 m800 cartridges
What should the architect explain to the customer?
- A. Mixing different models of cartridges requires the customer to use an HPE Moonshot Provisioning Manager (MPM)
- B. Mixing different models of cartridges in the same chassis is not supported
- C. A chassis can support both m710 and m800 cartridges, but the m710 cartridges will not be able to use their accelerators
- D. A chassis can support both m710 and m800 cartridges, but the m710 cartridge adapters will operate at
1Gbps rather than 10Gbps
Answer: C
NEW QUESTION 29
A software development customer's data center has servers from three different vendors. The customer plans to purchase 15 HPE c7000 enclosures that are populated with BL460c Gen9 blades. Each enclosure will be deployed with HPE OneView advanced licensing. The customer uses third-party SNMP-based management tools as well as some custom
dashboards that were written to monitor the statue of the datacenter.
The infrastructure management team is concerned about how to integrate HPE OneView into its management strategy.
What should the architect demonstrate?
- A. how to access HPE OneView data and incorporate it into the internally developed dashboards using the REST API
- B. how to access HPE OneView data and incorporate it into the internally developed dashboards using the iLO RIBCL command language
- C. how to point the existing servers to the new HPE OneView instance for all SNMP traps
- D. how to use HPE OneView as the dashboard for the existing monitoring tools using the REST API
Answer: A
NEW QUESTION 30
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?
- A. Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
- B. Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
- C. Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports.
Stack the modules in different chassis and connect just one to the management network. - D. Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.
Answer: C
NEW QUESTION 31
An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS.
Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?
- A. processor and memory
- B. drive capacity and memory
- C. drive type (HDD versus SSD) and drive capacity
- D. adapter bandwidth and processors
Answer: B
NEW QUESTION 32
An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records.
Which value does the architect need to consider?
- A. fair market value (FMV)
- B. net investment value (NIV)
- C. net book value (NBV)
- D. total cost of acquisition (TCA)
Answer: C
Explanation:
Explanation
NEW QUESTION 33
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo r2800
- B. HPE Apollo 6000
- C. HPE Apollo 8000
- D. HPE Apollo r2200
Answer: A
Explanation:
The Apollo r2200 and r2800 would both be a possible candidate with 4 x dual CPU servers, but the request is that some nodes must be compute nodes and some must be data nodes. The r2200 has fixed disks to every node, whereas the r2800 can be flexible e.g. 2 nodes with two disk drives and two nodes with 4 disk drives.
NEW QUESTION 34
A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.
Which statement most accurately describes different platform support in HPE OneView?
- A. WBEM Providers will be used for any server managed by HPE OneView.
- B. HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.
- C. The customer can select from different management protocols between SNMP V2 and SNMP VS to match the security requirements.
- D. All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.
Answer: A
NEW QUESTION 35
An architect is designing a data center solution that contains an HPE BladeSystem for the virtual application, infrastructure, and VDI environment. It also contains an HPE Moonshot for the web servers.
In which parts of the HPE Transformation Area does this solution fit?
- A. empower and protect
- B. enable and empower
- C. transform and protect
- D. transform and empower
Answer: D
NEW QUESTION 36
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo 6000
- B. HPE Apollo r2200
- C. HPE Apollo r2800
- D. HPE Apollo 8000
Answer: B
NEW QUESTION 37
......
HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Exam cost is as follow
The price of HPE Master ASE - Server Solutions Architect (HPE0-S22) exam is $200 USD.
Fully Updated Dumps PDF - Latest HPE0-S22 Exam Questions and Answers: https://gocertify.actual4labs.com/HP/HPE0-S22-actual-exam-dumps.html