Exam Dumps 300-430 Practice Free Latest Cisco Practice Tests
300-430 Exam Questions | Real 300-430 Practice Dumps
Cisco 300-430: Details + Topics
This test is also called Implementing Cisco Wireless Networks or ENWLSI. It is among the concentration exams for CCNP Enterprise that you need to choose from. You select it from a list of tests that also include Cisco 300-410, Cisco 300-415, Cisco 300-420, Cisco 300-425, and Cisco 300-435. The 300-430 exam is offered in English and Japanese only, and you will have 1 hour and 30 minutes to deal with about 60 questions. The expected question formats include testlets, multiple choice, and fill-in-the-blank.
The Cisco 300-430 exam is administered through Pearson VUE and the registration fee is $300. The official passing score is 825 points, so try to earn more than that. If you want to schedule this test, you have to create an account on the Pearson VUE platform and follow the instructions up to the end.
Details of Cisco 300-430 Exam
Cisco 300-430 contains about 65 questions and the students are required to cover them within the allocated time of 90 minutes. They can be delivered in many formats, including testlets, drag and drop, multiple choice, and fill-in-the-blank. It is essential to grasp a minimum of 750 points out of a total of 1000. This result leads the learners to the Cisco Certified Specialist – Enterprise Wireless Implementation and CCNP Enterprise certifications. Please keep in mind that this test is available in English and Japanese. Besides that, the applicants have to pay $300 and register for the exam through Pearson VUE. This platform offers two delivery methods, and the candidates can opt for the appropriate option. If you want to pass it from the comfort of any place, you can choose the online testing. On the other hand, the professionals can pick up the in-person delivery, and take 300-430 ENWLSI at one of the testing centers. Those individuals who do not clear this exam on the first try will be required to retake it. However, they must wait a minimum of five days before their next attempt.
NEW QUESTION 59
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
- A. SNMP
- B. SOAP/XML
- C. NMSP
- D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION 60
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. WPA+WPA2
- B. 802.1X
- C. CKIP
- D. Static WEP + 802.1X
- E. Static WEP
Answer: A,E
Explanation:
Explanation
"When setting the security setting in the WLAN, there are specific elements that are not supported on the 600 series. For Layer 2 Security, only these options are supported for the Cisco Aironet 600 Series OEAP: None WPA+WPA2 Static WEP can also be used but not for .11n data rates."
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-600-series-officeextend-access-point/113003-office
NEW QUESTION 61
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. connect and engage
- B. analytics
- C. detect and locate.
- D. presence
Answer: D
Explanation:
NEW QUESTION 62
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)
- A. X, Y real location
- B. WLC IP address
- C. client MAC address
- D. AP name
- E. client description
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/88/b_ap_4800_hyperlocation_deployment_guide.html
NEW QUESTION 63
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. SE-connect
- B. split tunneling
- C. AP failover priority
- D. FlexConnect
Answer: B
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/wireless/aironet-602-officeextend-access- point/117540-configure-splittunneloeap-00.html
NEW QUESTION 64
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. DHCP
- B. hostname
- C. IP address
- D. OS version
- E. MAC OUI
- F. HTTP user agent
Answer: A,E,F
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION 65
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. Packet direction has no significance; it is always Any.
- B. To have the complete list of options, the CPU ACL must be created only by the CLI.
- C. It must be Inbound because traffic goes to the WLC.
- D. It must be Outbound because it is traffic that is generated from the WLC.
Answer: C
Explanation:
NEW QUESTION 66
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- B. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- C. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
- D. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
Answer: B
Explanation:
NEW QUESTION 67
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. Packet direction has no significance; it is always Any.
- B. It must be Outbound because it is traffic that is generated from the WL
- C. To have the complete list of options, the CPU ACL must be created only by the CLI.
- D. It must be Inbound because traffic goes to the WLC.
Answer: D
Explanation:
NEW QUESTION 68
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION 69
A corporation has employees working from their homes. A wireless engineer must connect 1810 OEAP at remote teleworker locations. All configuration has been completed on the controller side, but the network readiness is pending. Which two configurations must be performed on the firewall to allow the AP to join the controller? (Choose two.)
- A. Allow UDP ports 12222 and 12223 on the firewall.
- B. Configure a static IP on the OEAP 1810.
- C. Enable NAT Address on the 5520 with an Internet-routable IP address.
- D. Block UDP ports 1812 and 1813 on the firewall.
- E. Allow UDP ports 5246 and UDP port 5247 on the firewall.
Answer: A,E
NEW QUESTION 70
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. SE-connect
- B. split tunneling
- C. AP failover priority
- D. FlexConnect
Answer: B
Explanation:
NEW QUESTION 71
A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?
- A. self-registration guest portal
- B. native supplicant provisioning
- C. MAC authentication bypass
- D. local web auth
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/216330-ise-self-registered-guest-portal-configu.html
NEW QUESTION 72
Refer to the exhibit.
The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives NetFlow data from the WLC.
- B. The Cisco CMX server receives NMSP traffic from the WLC.
- C. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
- D. The Cisco CMX server receives SNMP traffic from the WLC.
Answer: C
NEW QUESTION 73
An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration?
- A. Each WLC management address must be in a different multicast group.
- B. Each WLC must be assigned a unique multicast group address.
- C. Both WLCs must be assigned the same multicast group address.
- D. Each WLC management address must be in the same multicast group.
Answer: B
NEW QUESTION 74
Refer to the exhibit.
Which area indicates the greatest impact on the wireless network when viewing the Cisco CleanAir Zone of Impact map of interferers?
- A. C
- B. A
- C. D
- D. B
Answer: C
NEW QUESTION 75
All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?
- A. Multicast IGMP snooping is not enabled
- B. The multicast group includes all APs
- C. The multicast group is assigned the wrong VLAN
- D. The wrong multicast address was used
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/74/configuration/guides/consolidated/b_cg74_CONSO
NEW QUESTION 76
What must be configured on the Global Configuration page of the WLC for an AP to use 802.1x to authenticate to the wired infrastructure?
- A. supplicant credentials
- B. RADIUS shared secret
- C. TACACS server IP address
- D. local access point credentials
Answer: B
NEW QUESTION 77
Which statement about the VideoStream/Multicast Direct feature is true?
- A. It converts the unicast frame to a multicast frame over the air.
- B. Each VideoStream client acknowledges receiving a video IP multicast stream.
- C. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.
- D. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicastdelivery mechanism.
Answer: B
NEW QUESTION 78
An engineer is integrating a new Cisco Mobility Services Engine with Cisco Prime Infrastructure to use Cisco CMX Location Analytics. Which action is required?
- A. Install Cisco Prime infrastructure with floor maps
- B. Enable tracking parameters in Cisco Mobility Service Engine
- C. Enable Context Aware and CMX Browser Engage
- D. Set history parameters in Cisco Mobility Service Engine
Answer: B
NEW QUESTION 79
......
Ideal Candidates for 300-430 Test
In general, 300-430 targets professionals of different roles who are aiming to obtain the Cisco Certified Specialist – Enterprise Wireless Implementation certification. They are network designers, sales engineers, or wireless network engineers, among the rest. The experience gained in these positions helps the candidates understand the topics tested in this exam better.
The vendor doesn't mention any prerequisites. However, it would be helpful for applicants to have basic knowledge of Cisco wireless networks and skills associated with CCNA certification. Also, when it comes to CCNP Enterprise, one should also pass 350-401 test to earn it, and 3 to 5 years of networking experience are recommended.
Verified 300-430 Exam Dumps Q&As - Provide 300-430 with Correct Answers: https://gocertify.actual4labs.com/Cisco/300-430-actual-exam-dumps.html