CCNP Data Center 350-601 Real Exam Questions and Answers FREE Updated on Jan 23, 2023
350-601 Ultimate Study Guide - Actual4Labs
NEW QUESTION 113
A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?
- A. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
- B. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
- C. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80. - D. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80.
Answer: C
Explanation:
Apply Both Direction and Reverse Filter Port in the subject for the filter. These two options are by default enabled...This means that if the provider EPG initiates traffic toward the consumer EPG, the Cisco ACI fabric allows it for any destination ports if the source port is 80.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html Reverse filter and apply in both directions is default.
If a filter allows traffic from any consumer port to a provider port (e.g. 8888), if reverse port filtering is enabled and the contract is applied both directions (say for TCP traffic), either the consumer or the provider can initiate communication. The provider could open up a TCP socket to the consumer using port 8888, whether the provider or consumer sent traffic first.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html
NEW QUESTION 114
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.
- A. C6 non-Retention
- B. C6 Retention
- C. C0/C1 state
- D. C2 state
Answer: C
NEW QUESTION 115
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)
- A. VLAN ID
- B. WWNN
- C. MAC addresses
- D. Fabric ID
- E. WWPNPool
Answer: B,D
NEW QUESTION 116
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
NEW QUESTION 117
Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)
- A. EPLDs can be upgraded without replacing the hardware.
- B. The EPLDs for all the modules on a switch must be upgraded at the same time.
- C. An upgrade verification identifies the impact of each EPLD upgrade.
- D. EPLDs can be upgraded only to the latest EPLD image.
- E. EPLD upgrades can be completed without powering down the module during the upgrade.
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/upgrade/upgrade.html
NEW QUESTION 118
Refer to the exhibit.
What is configured as a result of running these commands?
- A. strict unicast RPF
- B. reverse lookup for outbound packets
- C. IP Source Guard
- D. loose unicast RPF
Answer: A
NEW QUESTION 119 
Refer to the exhibit. An administrator must complete the unified fabric configuration between Server1 and a pair of Cisco Nexus 9000 Series Switches Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the N9K-1 configuration Snippets are used more than once.
Answer:
Explanation:
Explanation
Po12
Vlan
Vfc1
Po12
NEW QUESTION 120
Which two actions should be performed before upgrading the infrastructure and firmware of multiple UCS blades? (Choose two)
- A. Run the Check Conformance feature to verify that all your components are running the compatible firmware version after the upgrade
- B. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 15% available space
- C. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space
- D. Enable Smart Call Home feature during the firmware upgrade process
- E. Get Full State and All Configuration backup files before beginning the upgrade
Answer: A,E
NEW QUESTION 121
Refer to the exhibit.
What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?
- A. displays the impact of the upgrade on the operation of the switch
- B. upgrades the EPLD on the switch disruptively
- C. displays the compatibility of the EPLD upgrade and the image in the bootflash
- D. shows a simulated upgrade of the EPLD
Answer: A
NEW QUESTION 122
Refer to the exhibit.
Refer to the exhibit. An engineer logs all occurrences of a configuration being saved. The engineer must generate an additional log message when someone attempts to change the configuration for interface Ethernet 1/1. Which set of commands must be used to meet these requirements?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 123
Which behavior defines streaming telemetry as a push model in Cisco devices?
- A. Events and network changes generate telemetry data
- B. JSON encoded telemetry data is transported using the gRPC protocol
- C. Monitoring clients are pulling data from the network to see real-time statistics
- D. The network devices send data in JSON or GPB format to configured endpoints
Answer: D
Explanation:
Explanation
https://developer.cisco.com/docs/nx-os/#!telemetry/streaming-telemetry
https://developer.cisco.com/docs/ios-xe/#!streaming-telemetry-quick-start-guide/streaming-telemetry
NEW QUESTION 124
Refer to the exhibit.
What is the reason the system-fm-vrrp checkpoint was created?
- A. The VRRP process crashed and the checkpoint was automatically created.
- B. The VRRP-enable feature has been disabled.
- C. The VRRP service restarted and the checkpoint was automatically created.
- D. The network administrator manually created it.
Answer: B
NEW QUESTION 125
An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements
* Switch1 must retain the primary role if switch2 goes offline
* Switch1 must retain the primary role until normal conditions are restored.
* Switch1 and switch2 must ensure that the routing tables are converged before taking the active role
* switch2 must retain the primary role if the default gateway is not reachable Drag and drop the configuration commands from the right to the left to meet the requirements. The commands are used more than once Not all commands are used
Answer:
Explanation:
NEW QUESTION 126
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
Explanation:
Explanation
The following example modifies an overridden policy by changing the number of FCNS database entries to
1500. It also generates both the configured and the default syslog messages of the default system policy event manager applet fcns_policy override __fcns_entries_max_per_switch event fcns entries max-per-switch 1500 action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit.
NEW QUESTION 127
An engineer must use the Embedded Event Manager to monitor events that occur on a cisco Nexus 9000 series switch. An environment variable needs to be created so that several policies use the monitored events in in their actions. The external email server is represented by IP address 10.10.10.10. which command sets the environment variable?
- A. N9k2 (config-apple1)# environment mallserver ''10.10.10.10''
- B. N9k2(config)# event manager policy environment mallserver ''10.10.10.10''
- C. N9k2# event manager environment mallserver ''10.10.10.10''
- D. N9k2 (config)# event manager environment mallserver ''10.10.10.10''
Answer: D
Explanation:
To set an Embedded Event Manager (EEM) environment variable, use the event manager environment command in global configuration mode. To disable an EEM environment variable, use the no form of this command. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/command/eem-cr-book/eem-cr-e1.html
NEW QUESTION 128
Refer to the exhibit.
Refer to the exhibit. Which backup operation type not include the preserve identities feature?
- A. Logical configuration
- B. All configuration
- C. Full state
- D. System configuration
Answer: C
NEW QUESTION 129
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: D
NEW QUESTION 130
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 131
An engineer is using REST API calls to configure the cisco APIC. Which data structure must be used within a post message to receive a login token?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/ b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html
NEW QUESTION 132
An engineer is duplicating an existing Cisco UCS setup at a new site. What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)
- A. contains the configuration organizations and locales
- B. contains the AAA and RBAC configurations
- C. contains a file with an extension.tgz that stores all of the configurations
- D. contains all of the configurations
- E. contains the VLAN and VSAN configurations
Answer: A,E
Explanation:
Logical configuration-An XML file that includes all logical configuration settings such as service profiles, VLANs, VSANs, pools, and policies. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect. You cannot use this file for a system restore.
NEW QUESTION 133
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right
Answer:
Explanation:
Explanation
Graphical user interface, table Description automatically generated with medium confidence
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/ configuration/guides/fabric/nx-os/nx_os_fabric/zone.html
NEW QUESTION 134
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 135
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
Explanation
prevent unauthorized - fabric binding.
Uses the exchange fabric membership- fabric binding
Can be distributed - port security
Allows a preconfigured - port security
NEW QUESTION 136
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes. What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)
- A. performs a complete binary dump of the databases as a sql file
- B. contains all of the runtime states and statuses but not the configurations
- C. performs a complete binary dump of the database as a bin file
- D. performs a complete binary dump of the database as a .txz file
- E. contains all of the configurations
Answer: D,E
Explanation:
File: compressed file in .tar.gz format
https://www.virtual-odyssey.com/2019/10/31/its-the-little-stuff-cisco-ucs-backups/ the file extension for bin in a cisco context is usually the OS.
tar files are used for backup.
https://peazip.github.io/tar-file-format.html
NEW QUESTION 137
......
Ultimate Guide to Prepare 350-601 Certification Exam for CCNP Data Center: https://gocertify.actual4labs.com/Cisco/350-601-actual-exam-dumps.html