1z0-1075-24 Practice Exams and Training Solutions for Certifications
Dumps Free Test Engine Player Verified Answers
NEW QUESTION # 31
Which three entities must you set up in Oracle Manufacturing Cloud to create a work definition for an item that will be manufactured in-house?
- A. Manufacturing lead time
- B. Resources
- C. Operation items
- D. Production line
- E. Operations
Answer: B,C,E
Explanation:
To create a work definition for an in-house manufactured item in Oracle Manufacturing Cloud, the following entities must be set up:
Resources: Resources such as machines, labor, or tools are required to define what is needed to execute each operation.
Operations: These represent the steps in the manufacturing process. Each operation can have multiple resources and associated work instructions.
Operation Items: These are the items consumed or used during the operation. They include the components and materials needed for production.
While Production Line (C) and Manufacturing Lead Time (E) are important for scheduling and capacity planning, they are not mandatory for creating a basic work definition.
NEW QUESTION # 32
A Production Operator is reporting an orderless transaction and realizes that the item has to be scrapped because some specifications were not met during one of the operations of the item. While performing orderless transactions, the operator notices that the Scrap and Return from Scrap transaction types are not available to transact.
Which privilege does the operator need to have to use these two transaction types?
- A. Print Work Order Traveler
- B. Return from Scrap Transactions
- C. Report Material Transactions
- D. Report Scrap Transactions.
Answer: D
Explanation:
In Oracle Manufacturing Cloud, for a Production Operator to perform scrap and return from scrap transactions during an orderless transaction, they must have the Report Scrap Transactions privilege. This allows them to properly record and reverse scrap transactions for any items that fail to meet specifications.
Report Scrap Transactions grants the operator the necessary permissions to use both the Scrap and Return from Scrap transaction types. Without this privilege, these transaction types will not be available in the system.
Incorrect options:
Return from Scrap Transactions (B) is not the correct privilege; the privilege to both scrap and return from scrap is covered under Report Scrap Transactions.
Print Work Order Traveler (C) and Report Material Transactions (D) are unrelated to scrap transaction reporting.
NEW QUESTION # 33
Which statement is NOT true about using a Quick Complete action for an operation transaction?
- A. You can use it for simultaneous reporting of one or more transactions.
- B. You can use It to transact one or more serial numbers.
- C. It is used on serial tracked operations and non-serial tracked operations with or without inspections.
- D. You can use it to collect Inspection results.
- E. You can use it to transact only one serial number at a time.
Answer: E
Explanation:
The Quick Complete action allows for fast, simplified transaction processing for work orders and operations. The statement that is not true is:
Statement E is incorrect because Quick Complete can be used to transact multiple serial numbers at a time, not just one. This feature is designed to handle both serial-tracked and non-serial-tracked operations efficiently.
Correct statements:
Statement A: Quick Complete supports simultaneous reporting of multiple transactions, allowing for streamlined processing.
Statement B: It can be used for both serial-tracked and non-serial-tracked operations, whether or not inspections are involved.
Statement C: Multiple serial numbers can be transacted at once using this feature.
Statement D: While Quick Complete can handle inspection-related transactions, it is not specifically for collecting inspection results.
NEW QUESTION # 34
Which option represents all the production exception types that can be reported by a Production Operator in Oracle Manufacturing Cloud?
- A. Work Center and Resources
- B. Resources and Components
- C. Work Area. Work Center. Resources, Components, and Miscellaneous
- D. Work Area, Work Center, and Resources
- E. Work Area, Work Center, Resources, and Components
Answer: E
Explanation:
In Oracle Manufacturing Cloud, production operators can report several types of production exceptions that affect the flow of the production process. The complete list of production exception types that can be reported includes:
Work Area: Issues related to the broader production environment.
Work Center: Problems or exceptions that arise at specific work centers.
Resources: Issues with labor, machines, or tools that are part of the production process.
Components: Exceptions related to materials or components used in manufacturing.
Incorrect options:
Options A, B, C, D are incomplete and miss one or more of the exception types available in Oracle Manufacturing Cloud.
NEW QUESTION # 35
A manufacturing plant has two shifts of eight hours each for the work center WCI: day shift and night shift. You associate four units each of the resources R1, R2, R3, and R4 to WCI. The customer wants to assign ail units of R2 available for day and night shift.
What is the correct sequence of steps to achieve this?
- A. Associate R2 with WCI > Deselect the Available 24 Hours check box > Go to the Resource Availability region > Enter 2 In the Day Shift column > Enter 2 In the Night Shift column.
- B. Associate R2 with WCI > Select the Available 24 Hours check box > Go to the Resource Availability region > Enter 2 in the Day Shift column > Enter 2 in the Night Shift column.
- C. Associate R2 with WC1 > Select the Available 24 Hours check box > Go to the Resource Availability region > Enter 4 in the Day Shift column > Enter 4 In the Night Shift column.
- D. Associate R2 with WC1> Deselect the Available 24 Hours check box > Go to the Resource Availability region > Enter 4 in the Day Shift column > Enter 4 In the Night Shift column.
Answer: C
Explanation:
In Oracle Manufacturing Cloud, to assign all units of resource R2 across both day and night shifts for the work center WC1, follow these steps:
Associate R2 with WC1 - This step ensures that the resource R2 is linked to the work center.
Select the Available 24 Hours check box - By selecting this option, you indicate that the resource is available for both shifts across the full 24-hour period.
Enter 4 in the Day Shift and Night Shift columns - Inputting 4 units in both shifts ensures that all units of R2 are available for use during the entire day and night shifts.
NEW QUESTION # 36
You are implementing project-driven supply chain functionality. You need to set up movement requests to issue or transfer project material to manage the inventory associated with projects and tasks.
Which two are types of movement requests to issue or transfer project material?
- A. Pick transactions Interfaced by the project costing project and task using the project material, common Inventory, or Inventory from another project.
- B. Transfer project material from one subinventory to another.
- C. Create o movement receipt line with the Project Costing widget.
- D. Perform manual pick for such movement requests using the project material, common inventory, or inventory from another project.
Answer: B,D
Explanation:
When setting up movement requests in a project-driven supply chain, you need to manage inventory associated with specific projects and tasks. The two correct types of movement requests in this context are:
Statement A: Transfer project material from one subinventory to another - This is a standard type of movement request in Oracle Cloud, allowing project materials to be transferred between subinventories. It is essential for managing inventory tied to specific projects and tasks, ensuring that materials are available where needed for project execution.
Reference:
Statement D: Perform manual pick for such movement requests using the project material, common inventory, or inventory from another project - Manual picking for project-specific material is another supported operation. It allows users to perform manual picks from various sources, such as project material, common inventory, or even inventory from other projects.
Incorrect Statements:
Statement B: Pick transactions are not interfaced specifically by project costing. Although project costing is relevant for tracking costs, it is not the driving factor behind pick transactions.
Statement C: There is no concept of creating a movement receipt line with the "Project Costing widget" in Oracle Manufacturing Cloud.
NEW QUESTION # 37
Which three statements are true about executing rework work orders with manual control?
- A. You cannot cancel the work order after releasing it or after performing any transactions.
- B. You must manually issue the assembly item to rework a work order, either partial or full quantity.
- C. You can cancel the work order after releasing it and after performing any transactions.
- D. You can perform operation completion only after the assembly has been issued to the work order, and only up to the quantity that the assembly component item Is issued to the work order.
- E. If the group has grouping attributes, only work orders that match the grouping attribute values can be assigned to the groups.
Answer: A,B,D
Explanation:
In Oracle Manufacturing Cloud, executing rework work orders with manual control requires certain steps and restrictions to ensure proper tracking of rework activities:
Statement A: You can perform operation completion only after the assembly item has been issued to the work order. The quantity that can be completed is limited to the quantity of the assembly issued.
Statement C: The assembly item must be manually issued to the work order, allowing for flexibility to issue either a partial or full quantity depending on the rework requirements.
Statement D: Once a work order is released and transactions have been performed, it cannot be canceled. This ensures that work orders already in progress are tracked properly.
Incorrect options:
Statement B: This is incorrect because you cannot cancel the work order after performing transactions.
Statement E: This statement is irrelevant in the context of executing rework work orders with manual control.
NEW QUESTION # 38
In which two places can you create and edit user-defined work order statuses?
- A. Work Definition work area tasks
- B. Functional Setup Manager > Setup: Manufacturing and Supply Chain Materials Management
- C. Scheduled Processes
- D. Work Execution work area tasks
Answer: B,D
Explanation:
User-defined work order statuses can be created and edited in the following areas of Oracle Manufacturing Cloud:
Functional Setup Manager: This is where the configuration of user-defined work order statuses is performed under the "Manufacturing and Supply Chain Materials Management" setup. Users can define new statuses and configure their behavior.
Work Execution work area tasks: Users can also manage work order statuses directly in the Work Execution area, which is part of the day-to-day management of production orders.
Incorrect options:
Scheduled Processes (A) and Work Definition work area tasks (B) are not areas where work order statuses are defined or edited.
NEW QUESTION # 39
During a Manufacturing Cloud implementation, a Production Supervisor wants to close the work orders for the previous month and make sure that they include the correct cost.
What must they do to achieve this?
- A. Make sure that all costs are Included while closing last month's work orders; however, variances can be Included after closing the work orders.
- B. Exclude cost variances while closing last month's work orders because those can be applied directly In Subledger Accounting.
- C. Include all costs and variances in last month's work orders and close them; however, the work orders where updates are expected must not be closed.
- D. Update work order costs at any time; they can be updated regardless of the status of the work order
Answer: C
Explanation:
To ensure that work orders for the previous month are closed with the correct costs, the Production Supervisor must:
Include all costs and variances in the work orders before closing them. This ensures that the work orders reflect the true cost of production, including any deviations from the expected costs. However, if there are work orders that are still in progress or expected to receive updates (such as material or labor transactions), those work orders should not be closed until all costs are finalized.
Incorrect options:
A: Excluding cost variances would result in inaccurate costing.
B: All costs, including variances, must be included before closing.
D: Costs cannot be updated after the work order is closed, so all updates must occur before closing the work order.
NEW QUESTION # 40
Which three statements are true about the main areas of Managerial Accounting?
- A. Supply Chain Orchestration automatically selects the correct process based on user-defined Subledger Accounting rules when a supply creation Is initiated.
- B. Landed Cost Management gives organizations financial visibility into their extended supply chain costs.
- C. Cost method can be defined with granularity down to individual Items.
- D. Receipt Accounting Is the application that performs accrual accounting for all types of receipts.
Answer: B,C,D
Explanation:
In Oracle Manufacturing Cloud and related financial applications, managerial accounting plays a significant role in tracking and managing costs across supply chain and manufacturing activities. The following is a breakdown of the correct statements:
Statement A: Receipt Accounting is the application that performs accrual accounting for all types of receipts - Receipt Accounting is a crucial module in Oracle Cloud that supports the tracking of costs and performs accruals related to receipts. This includes processes such as procurement receipts, interorganization transfers, and supplier shipments. This allows organizations to recognize and account for the expenses associated with these receipts.
Reference:
Statement B: Landed Cost Management gives organizations financial visibility into their extended supply chain costs - Landed Cost Management is designed to capture additional costs that arise during the transportation, handling, and processing of goods. This includes costs like shipping, insurance, and customs duties. By including these in the overall cost, it provides a more comprehensive view of the actual costs of goods in the supply chain.
Statement D: Cost method can be defined with granularity down to individual items - In Oracle Manufacturing Cloud, costing methods can be assigned not only at the organization level but also at a granular level down to individual items. This provides flexibility in defining different costing strategies for different products depending on their nature, manufacturing process, or market conditions.
Incorrect Statements:
Statement C: Supply Chain Orchestration automatically selects the correct process based on user-defined Subledger Accounting rules when a supply creation is initiated - While Supply Chain Orchestration automates various supply chain processes, it does not select processes based on Subledger Accounting rules. The orchestration system is more focused on managing and coordinating supply chain processes rather than determining accounting rules.
NEW QUESTION # 41
Which three requirements are fulfilled by nonstandard work orders?
- A. Rework
- B. Rescheduling
- C. Repair
- D. Prototype
Answer: A,C,D
Explanation:
Nonstandard work orders in Oracle Manufacturing Cloud are used for specialized tasks that do not follow typical production processes. The following are the main requirements fulfilled by nonstandard work orders:
Repair: Nonstandard work orders can be used for maintenance and repair tasks to fix or refurbish defective or damaged items.
Rework: These work orders are also used for rework processes, where a product needs to be reprocessed to meet quality standards or specifications.
Prototype: Nonstandard work orders can handle prototype production, where items are produced in small quantities for testing and development before mass production.
Rescheduling (A) is typically handled by standard work orders in the production schedule rather than through nonstandard work orders.
NEW QUESTION # 42
To help ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), your client wants to enable audit trail for manufacturing work definitions and standard operations.
Which is NOT included in the audit trail for standard operations such as creation, update, and deletion?
- A. Operation resources. Including alternate resources
- B. Item structure component attributes referenced from Product Information Management(PIM)
- C. Descriptive flexfields (OFFs) at any level
- D. Attachments at any level
- E. Work definition header and version attributes
Answer: B
NEW QUESTION # 43
Your client informs you that after running the "Process Item Structure Changes to Work Definitions" scheduled process, they received a workflow notification.
Which statement is NOT a workflow notification that you might get if automation is not performed?
- A. The original component has been assigned to more than one work definition operation.
- B. The manufacturing plant Is enabled for ERES, the work definition changes are not expected to go through an approval process.
- C. The replacement component has been assigned as an ad hoc Item to the same operation as the original component.
- D. The original component is not assigned to any work definition operation.
Answer: B
Explanation:
After running the "Process Item Structure Changes to Work Definitions" scheduled process, a series of workflow notifications may be triggered if the automation is not performed properly. The following notifications can be expected in scenarios where manual intervention is needed:
Statement B is incorrect because, in Oracle Manufacturing Cloud, if the manufacturing plant is enabled for ERES (Engineering Release Execution System), it generally implies that any changes in work definitions would still require an approval process for validation and control. The fact that ERES is enabled would not automatically bypass the approval process.
Correct Notifications:
Statement A: You may receive a notification that a replacement component has been assigned as an ad hoc item to the same operation where the original component was assigned.
Statement C: A notification may alert you that the original component is not assigned to any work definition operation, signaling a potential issue that requires manual intervention.
Statement D: It is also possible to receive a notification indicating that the original component has been assigned to more than one work definition operation, which may require review or adjustment.
NEW QUESTION # 44
Your client has asked you to implement the functionality to ensure that the system checks for Qualified Operators when reporting labor usage.
Which statement is NOT true?
- A. Quick Complete is allowed for operations that contain resources with associated job profiles.
- B. Validation of operator qualification is also enforced when reporting operation is completed through the dispatch list.
- C. You will need to report a qualified operator to manually report resource transactions, if the resource has a job profile associated with It.
- D. Qualified labor must be reported at the resource train stop.
Answer: A
Explanation:
When implementing the functionality for checking Qualified Operators during labor usage reporting in Oracle Manufacturing Cloud, it is important to enforce validation for operator qualifications. The following explains why statement C is not true:
Quick Complete is not allowed for operations that have resources with associated job profiles. This is because operations with specific job profile requirements must go through a more detailed validation process to ensure that the assigned operator has the necessary qualifications before the operation can be completed. Quick Complete bypasses detailed validations, making it unsuitable for operations with strict qualification checks.
Correct statements:
Statement A: Operator qualification is enforced when reporting operation completion through the dispatch list to ensure compliance.
Statement B: A qualified operator is required to manually report resource transactions when the resource has an associated job profile.
Statement D: Labor for qualified operators must be reported at the resource train stop to ensure the resource's qualifications are properly validated before continuing with the operation.
NEW QUESTION # 45
In which three ways does Supply Chain Orchestration enrich supply requests with project details to support outside processing for a project-specific work order?
- A. Supply Chain Orchestration initiates the creation of a purchase order without the work order.
- B. Expenditure Item Date is set to the receipt date and Expenditure Organization is set to the manufacturing plant.
- C. Expenditure Type is sat to the expenditure type associated to the outside processing Item.
- D. Supply Chain Orchestration initiates the creation of a requisition with the project details.
- E. Expenditure Item Date Is set to the requested need-by date and Expenditure Organization is set to the manufacturing plant.
Answer: C,D,E
Explanation:
Supply Chain Orchestration (SCO) plays a vital role in managing project-specific work orders, particularly for outside processing. Here's how it enriches supply requests with project details:
Statement B: Expenditure Item Date is set to the requested need-by date and Expenditure Organization is set to the manufacturing plant - In project-specific work orders, Supply Chain Orchestration assigns the need-by date as the Expenditure Item Date. The Expenditure Organization is typically set to the manufacturing plant handling the work order.
Reference:
Statement D: Supply Chain Orchestration initiates the creation of a requisition with the project details - SCO automatically creates a requisition with all relevant project details, such as project number, task, and expenditure information. This ensures that the procurement process is aligned with the project's financial and material requirements.
Statement E: Expenditure Type is set to the expenditure type associated with the outside processing item - In Oracle Cloud, expenditure types must align with the specific processing items. SCO ensures that the correct expenditure type is applied to the work order and subsequent requisitions.
Incorrect Statements:
Statement A: SCO does not initiate the creation of a purchase order without the work order. A work order is essential for processing the outside work, and its absence would disrupt the orchestration process.
Statement C: The Expenditure Item Date is not set to the receipt date but rather to the requested need-by date for proper alignment with project scheduling.
NEW QUESTION # 46
Your client needs to implement operational checks for compliance with training and job requirements. Which four statements are true about this functionality?
- A. The qualification Is used to warn a production supervisor If they assign operators that don't meet the skill requirements against the resource.
- B. A qualified operator need not be specified to report resource transactions.
- C. You do not have the ability to associate a Job profile with a Work order operation resource.
- D. The qualification Is enforced during reporting of labor usage.
- E. You have the ability to associate a Job profile with a Work definition operation resource.
- F. You have the ability to associate a Job profile with a Standard operation resource.
Answer: A,D,E,F
Explanation:
Oracle Manufacturing Cloud provides functionality to enforce compliance with training and job requirements through operational checks. The correct statements are:
Statement B: You can associate a job profile with a work definition operation resource. This ensures that only operators who meet the job requirements are allowed to perform the work.
Statement C: Qualifications are enforced when reporting labor usage, meaning that if an operator lacks the required qualifications, the system can prevent or warn about the labor transaction.
Statement D: You can also associate a job profile with a standard operation resource to enforce skills and training compliance.
Statement F: If an unqualified operator is assigned to a task, the system can notify the production supervisor to avoid non-compliance with skill requirements.
Incorrect options:
Statement A: A qualified operator must be specified to report resource transactions.
Statement E: You can associate a job profile with a work order operation resource, contrary to what is implied.
NEW QUESTION # 47
You have been asked to set up cost estimates for 10 different purchased items. Which two tasks can you perform to achieve this?
- A. Call a web service.
- B. Enter cost estimates directly into the UI.
- C. Use the Mass Edit functionality.
- D. Import a spreadsheet.
- E. Run the "Update Item Cost Estimate" ESS process.
Answer: B,D
Explanation:
To set up cost estimates for multiple purchased items in Oracle Manufacturing Cloud, the following tasks can be performed:
Import a spreadsheet (A): You can import cost estimates for multiple items at once using a preformatted spreadsheet, which allows for efficient data entry.
Enter cost estimates directly into the UI (E): Cost estimates can also be manually entered directly through the user interface for individual items, providing flexibility when fewer items need to be updated.
Incorrect options:
Calling a web service (B) is not the correct method for setting up cost estimates.
Mass Edit functionality (C) and Update Item Cost Estimate process (D) do not directly apply to entering new cost estimates for purchased items.
NEW QUESTION # 48
You create a work order, in which some of the operations have components with the Push supply type. While reporting material consumption on the Report Material Transaction page, you want the Push components to default whenever the operator selects Show Components.
Which setup task must you perform in the Manage Plant Parameters section to achieve this?
- A. Set Default Transaction Mode to Entered and Default Transaction Quantity to Work Definition.
- B. Set Default Transaction Mode to Work Definition.
- C. Set Default Transaction Mode to Entered.
- D. Set Default Transaction Mode to AIL
Answer: B
Explanation:
To ensure that Push components are automatically defaulted when reporting material consumption on the Report Material Transaction page, you must configure the system to use the Work Definition as the default source for transactions.
Setting Default Transaction Mode to Work Definition ensures that the system automatically pulls the component list and quantities as defined in the work order or work definition when operators perform material transactions. This setting streamlines the material consumption process for Push supply type components.
NEW QUESTION # 49
Which statement is NOT true about user-defined work order statuses?
- A. It is not recommended to update the name of the system status.
- B. The system automatically updates user-defined work order statuses.
- C. They are displayed on work order reports.
- D. All the new statuses are searchable so you can filter your job and manage the work order life cycle more easily.
Answer: B
Explanation:
User-defined work order statuses provide flexibility in managing the lifecycle of work orders in Oracle Manufacturing Cloud. However, the following is not true:
The system does not automatically update user-defined work order statuses. These statuses are manually updated by users to reflect the work order's progress through custom-defined states.
Correct statements:
Displayed on work order reports: User-defined statuses are visible in work order reports, allowing users to track the status of different orders.
Name changes to system status: It is not recommended to alter system-defined status names as it could disrupt core system processes and workflows.
Searchability of new statuses: User-defined statuses are searchable, making it easier to manage and track work orders.
NEW QUESTION # 50
A manufacturing plant works in two shifts of eight hours each. A Manufacturing user wants four units of a work center resource, R1, to be available during nonworking time, outside the regular shift on a particular day.
Which is the correct sequence of steps to create a resource exception on the Manage Work Center Resource Calendar page?
- A. Click outside the existing shift time on a specific date > Go to the Actions menu > Select Create Resource Exception > Populate the Start and Duration fields > Go to the Resource Availability and Overrides region > Populate 4 units in the Availability Override column.
- B. Click inside the existing shift time on a specific date > Go to the Actions menu > Select Create Resource Exception > Populate the Start and Duration Fields > Go to the Resource Availability region > Populate A units in the Default Availability column.
- C. Click outside the existing shift time on a specific date > Go to the Create Work Center page > Click the Resource Availability tab > Click the Add icon > Select R1 from the Resource drop-
- D. Click Inside the existing shift time on a specific date > Go to the Create Work Center page > Click the Resource Availability tab > Click the Add icon > Select R1 from the Resource dropdown list > Enter 4 in Default Units Available.
Answer: A
Explanation:
In Oracle Manufacturing Cloud, to make a resource (R1) available outside the regular shift for a specific day, you need to create a resource exception. This allows you to override the default shift schedule and make additional units of the resource available.
Click outside the existing shift time ensures that the exception applies to non-working hours.
Select Create Resource Exception from the Actions menu to initiate the exception.
Populate the Start and Duration fields to define the non-working period during which the resource will be available.
Enter 4 units in the Availability Override column to ensure that 4 units of resource R1 are made available for use during the exception period.
NEW QUESTION # 51
Which three statements are true about managing Units of Measure?
- A. If you want to transact items in units of measure that belong to classes other than their primary UOM class, you must define conversions between the base units of measure in different UOM classes.
- B. A unit of measure conversion is a mathematical relationship between two different units of measure.
- C. You must define the unit of measure class with a base unit of measure.
- D. Conversions between classes are unique for each item; the conversion rate varies for intraclass units of measure.
- E. A unit of measure standard conversion specifies the conversion factor by which the unit of measure is equivalent to the unit of measure class.
Answer: A,B,C
Explanation:
In Oracle Manufacturing Cloud, managing Units of Measure (UOM) is critical to ensuring that transactions, measurements, and conversions are handled accurately. Below is a detailed explanation of the correct statements:
Statement A: You must define the unit of measure class with a base unit of measure - This is a fundamental setup in Oracle Manufacturing Cloud. Every UOM class must have a base unit of measure defined because it serves as the reference for all conversions within the class. The base UOM acts as a standard, and all other UOMs within the class are defined relative to it.
Reference:
Statement B: If you want to transact items in units of measure that belong to classes other than their primary UOM class, you must define conversions between the base units of measure in different UOM classes - This is true. If an item's UOM belongs to one class, but you need to transact in another UOM from a different class, a conversion must be defined between the base UOMs of the two classes. This ensures seamless inter-class transactions and measurement consistency.
Statement E: A unit of measure conversion is a mathematical relationship between two different units of measure - UOM conversions in Oracle Cloud are defined mathematically, typically by specifying a conversion factor. This relationship is used by the system to automatically convert quantities between different units of measure, whether for inter-class or intra-class conversions.
Incorrect Statements:
Statement C: A unit of measure standard conversion specifies the conversion factor by which the unit of measure is equivalent to the unit of measure class - This statement is incorrect because a standard conversion relates two UOMs directly, not between a UOM and the class itself. Conversions operate between specific UOMs, not between a UOM and its class.
Statement D: Conversions between classes are unique for each item; the conversion rate varies for intraclass units of measure - This is not accurate because conversions between UOM classes are not unique for each item. Once a UOM conversion is established between classes, it applies globally unless there are specific item-level conversions.
This ensures a consistent approach to defining, transacting, and converting units of measure across different manufacturing and inventory processes within Oracle Manufacturing Cloud.
NEW QUESTION # 52
......
Oracle 1z0-1075-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Q&As with Explanations Verified & Correct Answers: https://gocertify.actual4labs.com/Oracle/1z0-1075-24-actual-exam-dumps.html